STIHL MS 181 C-BE Manual de instrucciones Pagina 48
- Pagina / 140
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
MS 171, MS 181, MS 181 C, MS 211, MS 211 C
English
46
Standard setting B
N Turn high speed screw (H)
counterclockwise as far as stop (no
more than 3/4 turn).
N Turn the low speed screw (L)
carefully clockwise as far as stop,
then turn it back 1/4 turn.
Adjusting Idle Speed
N Carry out the standard setting.
N Start and warm up the engine.
Engine stops while idling
N Turn the idle speed screw (LA)
clockwise until the chain begins to
run – then back it off 2 turns.
Saw chain runs while engine is idling
N Turn the idle speed screw (LA)
counterclockwise until the chain
stops moving – then turn it another
2 turns in the same direction.
WARNING
If the chain continues moving when the
engine is idling, have your saw checked
and repaired by your servicing dealer.
Erratic idling behavior, poor acceleration
(even though standard setting of low
speed screw is correct)
Idle setting is too lean
N Turn the low speed screw (L)
counterclockwise, no further than
stop, until the engine runs and
accelerates smoothly.
It is usually necessary to change the
setting of the idle speed screw (LA) after
every correction to the low speed
screw (L).
Fine Tuning for Operation at High
Altitude
A slight correction of the setting may be
necessary if engine does not run
satisfactorily:
N Carry out the standard setting.
N Warm up the engine.
N Turn high speed screw (H) slightly
clockwise (leaner) – no further than
stop.
NOTICE
After returning from high altitude, reset
the carburetor to the standard setting.
If the setting is too lean there is a risk of
engine damage due to insufficient
lubrication and overheating.
H
L
533BA020 KN
LA
L
533BA021 KN
- STIHL MS 171, 181, 211 1
- Instruction Manual 2
- Manual de instrucciones 2
- 67 - 137 2
- Contents 3
- Guide to Using this Manual 4
- Safety Precautions and 5
- Working Techniques 5
- 001BA275 KN 7
- 001BA113 KN 10
- 001BA114 KN 10
- 001BA087 LÄ 11
- 001BA031 KN 12
- 001BA082 KN 12
- 001BA257 KN 15
- 001BA035 KN 16
- 001BA174 KN 17
- 001BA037 KN 19
- 001BA038 KN 20
- 001BA033 KN 20
- 001BA051 LÄ 21
- 001BA088 LÄ 22
- 001BA143 KN 23
- 001BA150 KN 23
- 001BA144 KN 24
- 001BA145 KN 24
- 001BA147 KN 24
- 001BA148 KN 25
- Cutting Attachment 27
- 533BA001 KN 28
- 143BA003 KN 28
- Mounting the Bar and Chain 29
- (quick chain tensioner) 29
- 135BA011 KN 30
- 001BA229 KN 33
- 001BA240 KN 33
- 001BA218 KN 33
- 001BA219 KN 33
- Chain Lubricant 36
- Winter Operation 39
- Starting / Stopping the 39
- 001BA140 KN 40
- Operating Instructions 44
- 533BA019 KN 47
- 533BA020 KN 47
- 533BA021 KN 48
- Spark Arresting Screen in 49
- Spark Plug 49
- 000BA071 KN 50
- Chain Sprocket 51
- Maintaining and Sharpening 52
- Maintenance and Care 56
- Main Parts 58
- Specifications 60
- Maintenance and Repairs 62
- Disposal 63
- STIHL Incorporated Federal 63
- Emission Control Warranty 63
- Statement 63
- California Exhaust and 65
- Evaporative Emissions 65
- Control Warranty Statement 65
- STIHL Incorporated 65
- Trademarks 67
- Contenido 69
- Acerca de este manual de 70
- Medidas de seguridad y 71
- 001BA234 KN 75
- 001BA238 KN 75
- 001BA239 KN 75
- 001BA040 KN 91
- 001BA146 KN 91
- 001BA153 KN 91
- Accesorio de corte 96
- Montaje de la espada y 98
- 142BA063 KN 100
- 001BA112 KN 100
- 142BA064 KN 101
- Llenado de combustible 102
- 001BA158 KN 106
- 143BA011 KN 107
- 143BA024 KN 107
- 143BA012 KN 108
- 533BA003 KN 108
- Arranque / parada del motor 109
- 143BA018 KN 110
- 143BA019 KN 111
- 143BA020 KN 111
- 533BA004 KN 112
- 533BA005 KN 112
- 533BA006 KN 112
- Cuidado de la espada 114
- 533BA002 KN 115
- 533BA008 KN 115
- 533BA009 KN 116
- Ajuste del carburador 117
- Chispero en el silenciador 118
- 000BA039 KN 119
- Almacenamiento de la 121
- Revisión y sustitución del 121
- 689BA027 KN 122
- 689BA021 KN 123
- 689BA025 KN 123
- 689BA018 KN 124
- 689BA043 KN 124
- 689BA023 KN 124
- 689BA051 KN 125
- 689BA044 KN 125
- 689BA052 KN 125
- Componentes importantes 128
- Especificaciones 130
- 000BA073 KN 133
- Marcas comerciales 138
- Injection 139
- *04585338621D* 140
Relacionado con productos y manuales para Motosierras Eléctricas STIHL MS 181 C-BE
(12 paginas)
(140 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.060 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales