STIHL MS 461 R Manual de instrucciones Pagina 33

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 128
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 32
MS 461
English
31
N With the filler cap in the filling neck,
twist it counterclockwise until it
drops into its seat.
N Continue to twist the filler cap
counterclockwise (approx. 1/4 turn)
– this will twist the base of the cap
into the correct position.
N While pushing down on the cap,
twist the filler cap clockwise and
close it – see section "Closing."
For automatic and reliable lubrication of
the chain and guide bar – use only an
environmentally compatible quality
chain and bar lubricant. Rapidly
biodegradable STIHL BioPlus is
recommended.
NOTICE
Biological chain oil must be resistant to
aging (e.g. STIHL BioPlus), since it will
otherwise quickly turn to resin. This
results in hard deposits that are difficult
to remove, especially in the area of the
chain drive and chain. It may even cause
the oil pump to seize.
The service life of the chain and guide
bar depends on the quality of the
lubricant. It is therefore essential to use
only a specially formulated chain
lubricant.
WARNING
Do not use waste oil. Renewed contact
with waste oil can cause skin cancer.
Moreover, waste oil is environmentally
harmful.
NOTICE
Waste oil does not have the necessary
lubricating properties and is unsuitable
for chain lubrication.
Preparing the machine
N Thoroughly clean the filler cap and
the area around it to ensure that no
dirt falls into the tank
N Always position the machine so that
the filler cap is facing upwards
N Open the filler cap
Filling Chain Oil Tank
Standard oil pump
N Refill the chain oil tank every time
you refuel
Oil pump with increased delivery rate
(available option)
Frequent checking and refilling of the oil
tank is necessary – see "Adjusting oil
quantity".
N Refill the chain oil tank when the fuel
tank is approximately half empty
001BA239 KN
Chain Lubricant Filling Chain Oil Tank
001BA158 KN
Vista de pagina 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 127 128

Comentarios a estos manuales

Sin comentarios