STIHL MS 461 R Manual de instrucciones descargar pdf (Pagina 39)

MS 461

English

37

N Push the hand guard (1) forward –

the chain is locked.

N Press down the trigger lockout (2)

and pull the throttle trigger (3) at the

same time. Hold both levers in that

position and set the Master Control

lever to:

Choke shutter closed (l)

– if the engine is cold (also use this

position if the engine stopped when

you opened the throttle after

starting)

Starting throttle position (n)

– if the engine is warm, i.e. if it has

been running for about one minute.

N Hold and start your saw as

described.

When engine begins to fire

N Set the Master Control lever (1) to

the starting throttle position (n).

N Press the button to open the

decompression valve.

N Hold and start your saw as

described.

As soon as the engine runs

N Blip the throttle trigger (2), the

Master Control lever (1) moves to

the run position (F) and the engine

settles down to idling speed.

N Pull the hand guard back toward the

front handle.

The chain brake is now disengaged –

your saw is ready for operation.

NOTICE

Always disengage chain brake before

accelerating the engine. High revs with

the chain brake engaged (chain locked)

will quickly damage the clutch and chain

brake.

At very low outside temperatures

N Allow engine to warm up at part

throttle.

N Change over to winter operation if

necessary – see “Winter Operation”.

Stopping the Engine

N Move the Master Control lever to the

stop position (0).

If engine does not start

If you did not move the Master Control

lever to warm start n quickly enough

after the engine began to fire, the

combustion chamber is flooded.

1

2

3443BA007 KN

3

0

1

3443BA013 KN

2

1

3443BA014 KN

001BA186 KN

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 127 128

Comentarios a estos manuales

Sin comentarios